Place your tank on the bowl and secure each bolt with a washer and nut. Tighten each nut. Gently shake the tank to make sure it is secure. If the tank moves, tighten the nuts a little more.
Well, after spending an hour trying to get the last bolt free from the tank I let out a “Aaaahrrrgg! That’s it!” Jumped into my car and headed to Lowes for a new toilet. Walked right up to the plumbing person, Heidi (yeah a chick, how cool is that?), asked her to help me.
According to the Environmental Protection Agency, a typical single-family household uses about 30 percent of its water outside, on lawns, landscaping and gardens. As much as 50 percent of that water is wasted through evaporation or runoff. To avoid this kind of waste and lower your water bill use the following tips.
Minor problems with a toilet can be fixed by a homeowner but the first step is figuring out just what the problem is. Most commonly, homeowners run into a leaking toilet tank when flushed bowl, a toilet that will not flush properly – usually due to some type of a clog or a toilet that runs constantly.
The toilet isn’t flushing. There are several reasons why a toilet won’t or will only partially flush. The toilet tank’s water level may not be high enough, so make sure it is up to the fill line on the tank. Or, your toilet may have a bad flapper, which may not be closing properly or has become waterlogged.
If there is a toilet problems, squeaky door, broken window, and so on, you do not have to tire yourself fixing it up, all you need to do is report the problem, and they will fix them all up. So, it is really convenient on your part, because you do not have to tire yourself doing these things on your own.
These terms make reference to how thick the walls from the fixtures are. With fixtures, both Schedule 40 and Schedule 80 have a similar inner diameter, since Schedule 40 and 80 piping have a similar outdoors diameter. Because Schedule 80 includes a thicker wall, it’ll have a bigger outdoors diameter.